China Wire Testing Equipment

• 

  Wire And Cable Smoke Density Testing Equipment Mainly Used To Determine The Concentration Of Smoke Released By Cables

  Standard:IEC61034-1-2 and GB/T17651.1-1998

  Scope of application:cables and optical cables during combustion

  Function:used to determine the concentration of smoke

  Contact Now
• 

  Low Temperature Wire Winding Test Device， assessing and measuring the performance of circular cables or wire cores

  Standard:GB2951.4, GB2099-94, VDE0472, and IEC884-1

  Scope of application:measuring the performance of circular cables

  Low temperature winding sample diameter:Ф2.5~Ф12.5mm

  Contact Now
• 

  Wire Static Bending Testing Machine For Detecting The Dynamic Bending Test Of Rubber Insulated And Shea

  Standard:GB/T5023.2-2008, IEC60227-2：2003, GB/T 5013.2-2008

  Scope of application:suitable for detecting the dynamic bending test of rubber

  Sample diameter:Φ6-φ32mm (standard with two sets of fixtures)

  Contact Now
• 

  Cable Withstand Voltage Testing Machine Automatic Termination High-voltage Output Of This Instrument Is AC Voltage

  Door limit protection:do not close the door, even if the power-on point experiment starts, the equipment does not have any response, the software has: the safety door is not closed prompt

  Voltage zeroing protection:If the power is suddenly cut off during the experiment, it will automatically return to the zero position after the next boot to ensure that the initial voltage is at the zero position

  Termination voltage protection:ial voltage is at the zero position (3) Termination voltage protection: The termination voltage can be set by software to ensure that if there is an abnormal rise to the specified voltage during the step-up process, it will automatically terminate and ret

  Contact Now
• 

  Single Wire And Cable Vertical Combustion Testing Equipment For Conducting Vertical Slow Flame Propagation Tests

  Scope of application:Suitable for conducting vertical slow flame propagation tests on a single wire, cable or optical cable under specified flame conditions, and can also verify the combustion of droplets under flame conditions

  Standard:GB/T18380.11-2008、GB/T18380.12-2008、GB/T18380.13-2008、IEC60332-1-1：2004

  Igniter:for automatic high-pressure ignition

  Contact Now
• 

  High Power Wire And Cable Withstand Voltage Testing Machine For High Voltage Test Of Motor, Household Appliances

  Scope of application:Suitable for high voltage test of motor, household appliances, instruments, electronic devices, insulation materials, and wires and cables.

  Input voltage:AC 220V 50Hz

  Output test voltage:AC 0 ~ 5kV 50Hz

  Contact Now
• 

  Ozone Resistance Testing Machine For Ozone-Non-Reactive Materials For Estimating The Resistance Of Elastomeric

  Standard:IS 10810 (Part 13), IEC 60811-403, ASTM D 470, IS 3400 (Part 20): 1994, ISO 1431-1/1994 and ASTM 4575

  Scope of application:for estimating the resistance of elastomeric and polymeric materials of cables to ozone attack

  The working input power supply:220V+/-10%AC

  Contact Now
• 

  Servo Cable Extrusion Testing Machine For The Extrusion Resistance Of Mining Cables Below UC-0.66KVT

  Standard:GB12972

  Scope of application:mainly applicable to the extrusion resistance of mining cables below UC-0.66KVT and UCP-1.14KV

  Maximum measured load:200N

  Contact Now
• 

  Needle Flame Testing Equipment For Components Parts And Assemblies Of Electrical

  Standard:GB/T5169.5

  Scope of application:mainly suitable for components, parts, and assemblies of electrical

  Burner:35mm long, inner diameter: 0.5mm

  Contact Now
• 

  Mining Cable Load Combustion Testing Machine Used To Test The Combustion Characteristics Of MT 818-2009

  Standard:MT 386-1995， MT 818-2009

  Scope of application:used to test the combustion characteristics

  Combustor size:L1100× W900 × D525mm

  Contact Now
• 

  Impact Vibration Rain Burning Testing Machine For Mineral Insulated Cables

  Standard:BS6387

  Scope of application:suitable for mineral insulated cables with a rated voltage not exceeding 450/750V,

  Heat source:a 610 millimeter long tubular gas burner

  Contact Now
• 

  Wire Winding Torsion Testing Machine For Conducting Torsion And Winding Tests On Copper Rods, Aluminum Rods

  Scope of application:suitable for conducting torsion and winding tests on copper rods, aluminum rods

  Standard:GB/4909.7

  Power:DC/1HP

  Contact Now