Standard:UL1581、GB2099
Scope of application:to test the degree of thermal deformation of materials
Temperature:Normal temperature~300 ℃
Standard:UL1581 sect 1080.1~1080.14 , VW-1(V-ertical-specimen)Flame Test
Scope of application:applicable and widely used in the wire and cable industry
Combustion chamber:Boundary dimensions: 2.4m (length) * 1m (width) * 2.5m (height)
Standard:GB12666.6, IEC60331, GB/T 5013-2006
Scope of application:for testing the fire resistance characteristics of mineral insulated cables and wires
Size:(W)1500×(D)550×(H)1400mm
Standard:GB/T18380.11-2008、GB/T18380.12-2008、GB/T18380.13-2008
Scope of application:for conducting vertical slow flame propagation tests on a single wire
Igniter:for automatic high-pressure ignition
Standard:GB/T18380.31-2008 ,GB/T18380.32-2008
Scope of application:to evaluate the ability of vertically installed bundled wires, cables
Power supply:AC 220V, 50/60Hz, 2A
Standard:GB/T17650.1‐1998、GB/T17650.2‐1998
Scope of application:for determining the total amount of halogen acid gas
Power supply:220V, 60HZ,10A
Standard:GB/T17651.1-1998, IEC61034-1-2
Scope of application:used to determine the concentration of smoke released by cables
Temperature:5℃~30℃
Standard:GB2951.4, GB2099-94, VDE0472, and IEC884-1
Scope of application:for assessing and measuring the performance of circular cables or circular insulated wire cores
Low temperature winding sample diameter:Ф2.5~Ф12.5mm
Standard:IEC60227-2:2003, IEC60245-2:1998
Scope of application:suitable for detecting the dynamic bending test
Sample diameter:Φ6-φ32mm
Standard:GB/T 3048.1-2007,GB/T 3048.7-2007
Scope of application:used for the ability of wires and cables to withstand damage caused by electric traces caused by surface leakage under dirty conditions
Test voltage:0~6000v adjustable
Standard:ASTM D2275-14
Scope of application:Suitable for scientific research institutions, the developed solid insulation material corona aging resistance testing system can achieve different corona test conditions
Electrode spacing:100mm
Standard:GB/T5169.10, GB/T5169.13-2006, IEC60695-2-10:2000, GB2099, VDE 0620, GB4706.1, UL817 standards
Scope of application:used to test the stability of electronic and electrical products during operation
Test chamber volume:0.5M³, depth x width x height: 60x 95x 90cm