China Wire Testing Equipment

• 

  DX7120 Ozone Resistance Test Device For Ozone-Non-Reactive Materials

  Standard:IS 10810 (Part 13), IEC 60811-403, ASTM D 470, IS 3400 (Part 20): 1994, ISO 1431-1/1994 and ASTM 4575

  Scope of application:for estimating the resistance of elastomeric and polymeric materials of cables to ozone attack

  The working input power supply:220V+/-10%AC

  Contact Now
• 

  DX8466 Servo Cable Extrusion Tester 0-1.5KV Adjustable

  Standard:GB12972

  Scope of application:mainly applicable to the extrusion resistance of mining cables below UC-0.66KVT and UCP-1.14KV

  Maximum measured load:200N

  Contact Now
• 

  DX8521 Needle Flame Testing Machine Height 12mm

  Scope of application:The flame tester is mainly suitable for components, parts, and assemblies of electrical and electronic products, household appliances

  Standard:IEC884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694.

  Standard for igniting flames:flame height 12mm

  Contact Now
• 

  DX8516 Mining Cable Load Combustion Testing Machine

  Scope of application:is used to test the combustion characteristics of MT 818-2009 "Flame retardant cables for coal mines" under overload conditions

  Standard:MT 386-1995

  Combustor size:L1100× W900 × D525mm

  Contact Now
• 

  DX8515 Impact Vibration Rain Burning Test Machine

  Scope of application:It is suitable for mineral insulated cables with a rated voltage not exceeding 450/750V

  Standard:BS6387

  Test voltage:200-1000V

  Contact Now
• 

  DX8440 Wire Winding Torsion Tester

  Scope of application:Mainly suitable for conducting torsion and winding tests on copper rods, aluminum rods, and steel wires

  Standard:GB4909.4-2009 and GB4909.7-2009

  Sample diameter range:copper rod φ 8mm or less, steel wire Ф Below 3mm

  Contact Now
• 

  DX8422 Cable And Optical Cable Line Integrity Combustion Testing Machine

  Scope of application:Used to test the ability of wires and cables to operate continuously under specified conditions under a certain fire source and time.

  Standard:GB/T19216.11-2003/IEC60331-11:1999，GB/T19216.21-2003/IEC 60331-21:1999

  Current range:0.1-3A

  Contact Now
• 

  DX8412 Wire And Cable Jacket Scratch And Abrasion Resistance Tester

  Scope of application:Suitable for the scratch and abrasion resistance test of 30mm~80mm plastic outer jackets of cables.

  Standard:GB/T2951

  Scraping stroke:>600mm

  Contact Now
• 

  DX8393 Wire And Cable Two Three Wheel Bending Tester

  Scope of application:Mainly suitable for measuring the mechanical strength of PVC insulated cables or rubber

  Standard:GB/T 5013.2-2008, GB/T 5013.8-2008, and GB/T 5023.2-2008

  Power supply voltage:AC 380 V three-phase four wire

  Contact Now
• 

  DX8389 Wire Heating Deformation Tester

  Scope of application:This machine is used to test the degree of thermal deformation of materials such as plastics and wire sheaths.

  Standard:UL1581、GB2099

  Temperature:Normal temperature~300 ℃

  Contact Now
• 

  DX8382 Large Combustion Chamber / UL1581 Combustion Testing Machine / Vertical Horizontal Combustion Testing Chamber

  Standard:UL1581 sect 1080.1~1080.14, VW-1（V-ertical-specimen）Flame Test

  Test method:Adjust the flame height, place the top of the flame under the specimen, burn for 15 seconds, extinguish for 15 seconds, repeat 5 times, and check the burning condition of the specimen.

  Combustion chamber effective space:2.4m (length) * 1m (width) * 1.8m (height)

  Contact Now
• 

  DX8363 Single Wire And Cable Vertical Combustion Testing Machine

  Scope of application:Suitable for conducting vertical slow flame propagation tests on a single wire, cable or optical cable under specified flame conditions, and can also verify the combustion of droplets under flame conditions

  Standard:GB/T18380.11-2008、GB/T18380.12-2008、GB/T18380.13-2008、IEC60332-1-1：2004

  Igniter:for automatic high-pressure ignition

  Contact Now