Standard:GB/T 3048.1-2007,GB/T 3048.7-2007
Scope of application:used for the ability of wires and cables to withstand damage caused by electric traces caused by surface leakage under dirty conditions
Test voltage:0~6000v adjustable
Standard:ASTM D2275-14
Scope of application:Suitable for scientific research institutions, the developed solid insulation material corona aging resistance testing system can achieve different corona test conditions
Electrode spacing:100mm
Standard:GB/T5169.10, GB/T5169.13-2006, IEC60695-2-10:2000, GB2099, VDE 0620, GB4706.1, UL817 standards
Scope of application:used to test the stability of electronic and electrical products during operation
Test chamber volume:0.5M³, depth x width x height: 60x 95x 90cm
Standard:GB12666.6,IEC60331
Scope of application:Suitable for testing the fire resistance characteristics of mineral insulated cables and wires and cables with fire-resistant layers
Size:(W)1500×(D)550×(H)1400mm
Minimum Order Quantity:1
Price:Negotiation
Packaging Details:Wooden case
Door limit protection:do not close the door, even if the power-on point experiment starts, the equipment does not have any response, the software has: the safety door is not closed prompt
Voltage zeroing protection:If the power is suddenly cut off during the experiment, it will automatically return to the zero position after the next boot to ensure that the initial voltage is at the zero position
Termination voltage protection:ial voltage is at the zero position (3) Termination voltage protection: The termination voltage can be set by software to ensure that if there is an abnormal rise to the specified voltage during the step-up process, it will automatically terminate and ret
Scope of application:Suitable for high voltage test of motor, household appliances, instruments, electronic devices, insulation materials, and wires and cables.
Input voltage:AC 220V 50Hz
Output test voltage:AC 0 ~ 5kV 50Hz
Standard:IS 10810 (Part 13), IEC 60811-403, ASTM D 470, IS 3400 (Part 20): 1994, ISO 1431-1/1994 and ASTM 4575
Scope of application:for estimating the resistance of elastomeric and polymeric materials of cables to ozone attack
The working input power supply:220V+/-10%AC
Standard:GB12972
Scope of application:mainly applicable to the extrusion resistance of mining cables below UC-0.66KVT and UCP-1.14KV
Maximum measured load:200N
Scope of application:The flame tester is mainly suitable for components, parts, and assemblies of electrical and electronic products, household appliances
Standard:IEC884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694.
Standard for igniting flames:flame height 12mm
Scope of application:is used to test the combustion characteristics of MT 818-2009 "Flame retardant cables for coal mines" under overload conditions
Standard:MT 386-1995
Combustor size:L1100× W900 × D525mm
Scope of application:It is suitable for mineral insulated cables with a rated voltage not exceeding 450/750V
Standard:BS6387
Test voltage:200-1000V