China Wire Testing Equipment

• 

  DX8440 Wire Winding Torsion Tester

  Scope of application:Mainly suitable for conducting torsion and winding tests on copper rods, aluminum rods, and steel wires

  Standard:GB4909.4-2009 and GB4909.7-2009

  Sample diameter range:copper rod φ 8mm or less, steel wire Ф Below 3mm

  Contact Now
• 

  DX8422 Cable And Optical Cable Line Integrity Combustion Testing Machine

  Scope of application:Used to test the ability of wires and cables to operate continuously under specified conditions under a certain fire source and time.

  Standard:GB/T19216.11-2003/IEC60331-11:1999，GB/T19216.21-2003/IEC 60331-21:1999

  Current range:0.1-3A

  Contact Now
• 

  DX8412 Wire And Cable Jacket Scratch And Abrasion Resistance Tester

  Scope of application:Suitable for the scratch and abrasion resistance test of 30mm~80mm plastic outer jackets of cables.

  Standard:GB/T2951

  Scraping stroke:>600mm

  Contact Now
• 

  DX8393 Wire And Cable Two Three Wheel Bending Tester

  Scope of application:Mainly suitable for measuring the mechanical strength of PVC insulated cables or rubber

  Standard:GB/T 5013.2-2008, GB/T 5013.8-2008, and GB/T 5023.2-2008

  Power supply voltage:AC 380 V three-phase four wire

  Contact Now
• 

  DX8389 Wire Heating Deformation Tester

  Scope of application:This machine is used to test the degree of thermal deformation of materials such as plastics and wire sheaths.

  Standard:UL1581、GB2099

  Temperature:Normal temperature~300 ℃

  Contact Now
• 

  DX8382 Large Combustion Chamber / UL1581 Combustion Testing Machine / Vertical Horizontal Combustion Testing Chamber

  Standard:UL1581 sect 1080.1~1080.14, VW-1（V-ertical-specimen）Flame Test

  Test method:Adjust the flame height, place the top of the flame under the specimen, burn for 15 seconds, extinguish for 15 seconds, repeat 5 times, and check the burning condition of the specimen.

  Combustion chamber effective space:2.4m (length) * 1m (width) * 1.8m (height)

  Contact Now
• 

  DX8363 Single Wire And Cable Vertical Combustion Testing Machine

  Scope of application:Suitable for conducting vertical slow flame propagation tests on a single wire, cable or optical cable under specified flame conditions, and can also verify the combustion of droplets under flame conditions

  Standard:GB/T18380.11-2008、GB/T18380.12-2008、GB/T18380.13-2008、IEC60332-1-1：2004

  Igniter:for automatic high-pressure ignition

  Contact Now
• 

  DX8349 Wire And Cable Bundle Combustion Testing Machine

  Scope of application:Used to evaluate the ability of vertically installed bundled wires, cables, or optical cables

  Standard:IEC60332-3-10-2018，GB/T18380.31-2008

  External dimensions of combustion chamber:1120 (W) X2195 (D) X5077 (H) mm

  Contact Now
• 

  DX8332A Halogen Acid Gas Release Measuring Device

  Scope of application:It is suitable for assessing and measuri the performance of circular cables or circular insulated cores at low temperatures

  Standard:IEC 60754-1 Ed. 2.0 b:1994, IEC 60754-2 Ed. 1.0 b:1991

  Gas Washing Bottle:Height of liquid in the end of tube shall be 100 ~ 120mm in each bottle.

  Contact Now
• 

  DX8330 Wire And Cable Smoke Density Testing Machine

  Scope of application:Mainly used to determine the concentration of smoke released by cables and optical cables during combustion

  Standard:GB/T17651.1～2-1998、IEC61034-1~2

  Temperature:5℃~30℃

  Contact Now
• 

  DX8323 Wire Low-temperature Winding Device

  Scope of application:It is suitable for assessing and measuring the performance of circular cables or circular insulated cores at low temperatures

  Standard:GB2951.4, GB2099-94, VDE0472 and IEC884-1

  Diameter of low-temperature winding specimen:Ф2.5~Ф12.5mm

  Contact Now
• 

  DX8308 Wire Static Flexure Tester For Rubber And Plastic Cable

  Standard:GB/T5023.2-2008/IEC60227-2:2003，GB/T5013.2-2008/ IEC60245-2:1998

  Scope of application:It is mainly suitable for testing the flexure test of rubber and plastic insulation and sheathed flexible cable

  Test current:0.1A

  Contact Now