|
Product Details:
|
| Working Voltage: | AC 220V ± 10V 50Hz | Heating Power: | 3500W |
|---|---|---|---|
| Standard: | GB/T11835 | Dimensions: | 1000 * 400 * 1000 Mm |
| Ambient Temperature: | Room Temperature To 40 ° C | Relative Humidity: | ≤75% |
| High Light: | horizontal flammability tester,fire test chamber |
||
GB/T11835 Rock wool,slag wool and its products for thermal insulation Testing Equipment
Product Description:
Product overview: Suitable for rock wool, slag wool, glass wool and products, not for aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage rate. The thermal load shrinkage temperature is calculated by interpolation and calculated.
Standard:
GB/T11835
Model: DX8359
Technical parameters:
| Ambient temperature | room temperature to 40 ° C |
| Relative humidity | ≤75% |
| Working voltage | Working voltage |
| Heating power | 3500W |
| Scale measurement range | room temperature to 900 ° C |
| Heating rate | 5 ℃ / min ± 0.3 ℃ and 3 ℃ / min ± 0.2 ℃ can be set |
| Dimensions | 1000 × 400 × 1000mm length, width and height |
| Temperature controlled heating | 0-800 ℃ |
Implementation method: using a microcontroller or PLC temperature control module to achieve
Heating rate: the rising rate is divided into two sections, normal temperature ~ 700 ℃ and 700 ～ 900 ℃; and the heating rate and the maximum temperature can be set, with an error min ± 0.2 ℃
Thermocouple: K type
Heating furnace: ceramic fiber, chemical resistance, high temperature resistance, long-term use at 1600 ℃, short-term temperature of 1800 ℃, resistance to quenching and heating, not easy to crack, using grouting molding, high density.
Heating furnace wire: nickel 80 chromium 20 alloy wire, temperature resistance 1350 degrees
Heating rate: (50 ℃ -450 ℃) 5 ℃ / min; (450 ℃ -800 ℃) 3 ℃ / min
Main features:
the instrument uses a single-chip computer, multi-point program heating, the heat source uses a hot plate, safe and reliable, long service life, the instrument is equipped with a panel printer to print test results in time.
Installation environment (very important):
Required installation space: 1300 × 700 × 1500mm (length × width × height)
Ambient environment requirements: Keep away from flammable and explosive materials and corrosive liquids and gases
Working environment: 20 ℃ -40 ℃
Test pressure: 490Pa
Contact Person: Sophia Su
Tel: +86-13266221899
