|Product Name:||Building Material Cone Calorimeter ISO 9705||Power Supply:||380V,50/60HZ|
|Standard:||ISO 9705、ISO 13784-1、ASTM E 1537、EN 14390、ISO5660-1||Test Room Size:||3.6m (L)* 2.4m (W)* 2.4m (H)|
vertical flame test chamber,
fire test chamber
ASTM E 1537 Heat Release Rate Tester/Large Calorimeter
Areas of use:
The test method is used for fire technical modelling. The data from the test results can be used for modelling bigger fires. A fire sequence in the ISO 9705 – Room Corner Test and EN 13823 – SBI can for example be predicted using the ISO 5660 method. The cone calorimeter test is also largely used when testing products that are under development. A whole range of different data can be compared in order to eliminate products that will not have the sufficient fire characteristics.
- ISO 9705
- ISO 13784-1
- ASTM E 1537
- EN 14390
- The equipment consists of an ignition source, conical collector, exhaust pipes, fans, weighing station and measuring device component.
- Test system comprising: a gas collection and analysis system; gas control system; weighing measuring system; smoke density test system;
- Pipeline built-in temperature sensors, gas flow meters, gas sampling probe and a multi-stage filter sampling line analytical instruments to ensure long life.
|Fire material density||800kg/m cubed|
|Test room size||3.6m (L)* 2.4m (W)* 2.4m (H)|
|Catheter||0.4m (diameter), 5M(length including guide plate)|
|Sampling probe||2mm for 17 holes and 3mm for 16 holes|
|Door size||0.9m (W) x2.0m (H)|
|Square igniter size||250*250mm|
|Power supply||AC 380V, 50/60hz|
|Specification of cabinet||height = 1800mm, width = 900mm, and depth > 600mm|
- The system automatically fires and records relevant experimental data;
- Independent movable timing display platform.
- 10kV spark igniter, equipped with a safe cease-fire device.Fire fighting and drainage system design.
- Bipolar gas flow valve control system;Avoid leakage of air in the system caused by malfunction of solenoid valve, which leads to explosion risk;
- Stair design, convenient exhaust pipe maintenance.
Gas sampling system:
1. High-precision patent design sampling system;Ensure the sampling gas entering the gas analyzer is stable and free from impurities;Make the analysis result of analyzer more accurate;
2. Including particle filter;
3. Cold well: compressor principle refrigeration system;Gas sampling 0 ~ 5 ºC temperature control;
4. Air suction pump: provide gas sampling power source;
5. Drying cylinder;Oxygen and nitrogen dioxide were respectively analyzed for air drying and impurities removal.
6. High precision ball valve;Open and close the air circuit;
7. Flow controller.
1. Simultaneously analyze oxygen consumption, carbon monoxide and carbon dioxide production rate.
2. The resolution of the gas analyzer is: oxygen 0~25%, carbon monoxide 0~1%, and carbon dioxide 0~10%, respectively.
3. Set by-pass for quick response.
4. Data collection system: one set of dedicated collection system and brand lenovo computer
Contact Person: Sophia Su