Product Details:
|
Name: | DIN Abrasive Tester | Usage: | Tire, Conveyor Belt, Shoe Sole, Synthetic Leather |
---|---|---|---|
Power: | 1∮,AC220V,3A | Weight: | 61kg |
Volume: | 70×30×30cm | Weight Load: | 2.5N,5N |
Highlight: | foam compression test,shore hardness tester for rubber |
DIN Abrasion Resistance Testing Equipment for Rubber and Synthetic Leather Products
Quick Details:
Name | DIN abrasive tester |
Usage | test the friction of surface of rubber , tire, conveyor belt, shoe sole, synthetic leather |
Power | 1∮,AC220V,3A |
Weight | 61kg |
Volume | 70×30×30cm |
Description:
The tester is for the measurement of abrasion resistance or rubbers (vulcanized thermoset rubbers and thermoplastic elastomers) that are subject to abrasive/ frictional wear in actual service. The abrasion resistance is measured by moving a test piece across the surface of an abrasive sheet mounted to a revolving drum, and is expressed as volume loss in mm3 or abrasion resistance index in percent. For volume loss, a smaller number indicates better abrasion resistance, while for the abrasion resistance index; a smaller number denotes poorer abrasion resistance.
Technical parameters:
Sample | Diameter of 16mm,thickness of 6~15mm |
Fixture load | 2.5N |
Weight load | 2.5N,5N |
Fixture lateral moving distance | 4.2mm/circle |
Diameter of the cylinder | (150±0.2)mm |
Length of the cylinder | 460mm |
Rotation speed of the cylinder | 40rpm |
Distance reservation | 40m/20m(equals 84 circles/42 circles) |
Abrasion speed | 0.32m/sec |
Incline angle | 3°(the angle between sample support axle and the vertical plane of cylinder) |
Volume | 70×30×30cm |
Weight | 61kg |
Power | 1∮,AC220V,3A |
Contact Person: Sophia Su
Tel: +86-13266221899