Product Details:
|
Sample Diameter: | Φ0.3-φ10mm | Sample Length: | 150-200mm |
---|---|---|---|
Bending Angle: | ±90° | Bending Speed: | < 60 Times / Min |
Highlight: | horizontal flammability tester,vertical flame test chamber |
Electric Wire Bending Resistance Testing Machine for Metal Wires
Technical Parameters:
1. The sample diameter Φ0.3-φ10mm
2. The length of the sample 150-200mm
3. Bending angle ±90°
4. Bending speed < 60 times / min
5. Count range 0-9999
6. Motor power 1.1kw
7. The size of 1000*600*330mm
8. Test machine weight 110Kg
Test method:
It is suitable for repeated bending test of metal wire with diameter or thickness of 0.3mm-10mm. Repeated bending test is to fix one end of test piece, bend it by 90° around the cylindrical support of the specified radius, and then repeat bending in the opposite direction.
Compliance with the standard: in line with GB/T4909.5-2009 and GB/T238-2002, is mainly used for repeated bending tests of metal wires, including steel, aluminum and copper, to test the performance of metal wires subjected to plastic deformation in repeated bending and show Defects. After the plate holding device is equipped, bending test can also be performed on the plate sample.
Scope of application: Widely used in quality inspection and testing industry, as well as steel wire rope, aluminum material, copper material, wire and cable manufacturers.
Suitable for repeated bending tests of metal wires with a diameter or thickness of 0.3mm-10mm; to detect the ability to withstand plastic deformation in repeated bending. The repeated bending test is a repeated bending test in which one end of the specimen is fixed, and the stator is bent 90° around a predetermined radius, and then bent in the opposite direction.
Contact Person: Sophia Su
Tel: +86-13266221899