DX8315A Laminated Glass UV Aging Test Chamber 16 OSRAM UV Lamps 2000h EN ISO 12543-4

Product Overview

The DX8315A Laminated Glass Durability Test Chamber is built for UV aging testing of laminated glass. It reproduces long-term sunlight exposure in a controlled chamber so that blistering, delamination, yellowing and haze development can be evaluated before the glass reaches the facade.

Standard

Testing apparatus for EN ISO 12543-4:2011.

Key Features

• 16 OSRAM Ultra-Vitalux 300W lamps — original imported light source with 1000-hour rated lamp life for repeatable spectral output.
• 9 samples per run — interior working volume of 1390 × 1390 × 1100 mm accommodates a full batch of laminated glass specimens.
• Stable irradiation — total radiation intensity on the specimen surface held at 900 W/m² ± 100 W/m².
• Surface temperature control — 45 °C ± 5 °C measured on the sample surface, with internal thermometer and blackboard thermometer supplied as one set.
• Continuous 2000-hour testing — 2.5HP compressor and dedicated lamp heat dissipation system keep the chamber stable through long cycles.
• Complete instrument set — radiation meter with sensors, 9-channel thermocouple recorder, control instruments for temperature, irradiation and timing, plus electrical and wiring accessories.

Technical Parameters

Standard Configuration

1. Internal thermometer and blackboard thermometer, one set
2. Radiation meter inside the box, including sensors and testing instruments, one set
3. Thermocouple recorder, 9 channels
4. Control instruments for temperature, irradiation and timing control and display
5. Control electrical appliances and wire accessories, one set
6. Lamp heat dissipation system, fan and air duct, one set

Why Choose This Chamber

The chamber is a complete test station rather than a bare light box: light source, irradiation metering, temperature control, recording and heat management are supplied together, so a laboratory can start EN ISO 12543-4 aging programmes without sourcing extra instrumentation. The 2000-hour design duty matches the duration required for laminated glass durability assessment, and the 2.5HP cooling system keeps lamp output and sample temperature within tolerance across the full run.

Tell us your specimen size, target standard and voltage requirement, and our engineers will confirm the configuration before shipment.