|
Product Details:
|
| Product Name: | EN 136: 1998 Mask Heat Radiation Tester | Size: | 1,240(W)X700mm(D)X1,600(H)mm |
|---|---|---|---|
| Weight: | 1 | Test Area: | 100cm² |
| Power Source: | AC220V 50Hz | Warranty: | 12 Months |
| High Light: | EN 136 1998 Mask Tester,AC220V 50Hz Mask Tester,GB/T 16556: 2007 radiation tester |
||
| Size | 1,240(W)X700mm(D)X1,600(H)mm |
| Weight | 152KG |
| Electrical requirements | 220V, 30A |
| Exhaust | 30㎥/min |
| Instructions | available |
Performance characteristics:
1. Equipped with electric heating tube heating device, the main heater power is 4000W, the auxiliary heater power is 2000W, adjusted by 2 PID temperature controllers;
2. The stainless steel reflector is used to enhance the heat radiation performance applied to the mask;
3. The metal head mold device can wear a mask and breathe freely;
4. The metal head mold sliding track can move its horizontal position to adjust the distance between the mask and the radiation source;
5. Equipped with a water-cooled heat flow meter device to measure the heat radiation flux at a standard distance;
6. Equipped with artificial lung breathing device, the breathing is a sinusoidal output mode, which truly simulates human breathing;
7. PLC control mode, respiratory frequency and respiratory volume can be set freely;
8. The micro-pressure sensor device automatically detects the failure of the mask during the test.
Test Results:
Test duration 20 minutes (if there is no significant abnormality)
If the sun visor is damaged, or other components show signs of damage, the explosion time will be slightly extended
Contact Person: Sophia Su
Tel: +86-13266221899
