Flame Retardant Wire Testing Equipment IEC60754-1 Electric Cables Halogen Acid Gas Tester

Wire Testing Equipment IEC60754-1 Electric Cables Halogen Acid Gas Tester

Halogen gas release determination device

Application:

Suitable for the determination of total halogen gas content in low and halogen free flame retardant cables and the determination of gas acidity by measuring ph and conductivity.

Standards:

Iec60754‐1:1994,
Iec60754‐2:1991 standards
Ul2556‐ 9.10 of 2007 and 911

Equipment composition:

1. Tube furnace:The effective length of the heating chamber and the diameter of the pipe is 600 x salvation 42mm, equipped with an adjustable electrical heating system.Heating power:220v /10kw
2. Combustion tube:
Material:Refractory pipe made of silica, corrosion-resistant gas.
Specification:With an inner diameter of 40mm, the length protruding from the inlet side of the tubular furnace is 60~200mm, and the length extending from the outlet side is 60~100mm.The gap heating expansion is left for use.
3. Burning boat:

4. Gas collection:Adopt two selected bottles:One of them is equipped with a magnetic stirrer and is filled with 220ml sodium hydroxide solution.
5. Air supply system
Air flowmeter:20ml~200ml adjustable
Compressor (your company's own)
6. Sampling:500mg~1000mg
7. Determination of halogen acid content:
Analytical balance:The accuracy is 0.1mg
Digital ph meter:The precision is 0.02ph