|Control Mode:||PLC Touch Screen||Driver:||Stepper Motor|
|Test Load:||50Kg||Unit:||Kgf, Nf, Lbf|
|Stroke:||0 ~ 60mm||Speed:||5~30 Times/min|
vibration testing equipment,
drop test machine
Programmable Touch Screen Insertion and Extraction Force Test Equipment for Connectors
Control system: touch screen + PLC, Chinese interface.
Drive section: Stepper motor.
Test load: 50Kg.
Unit switching: Kgf, Nf, Lbf.
Test stroke: 0 ~ 60mm (without clamps).
Test speed: 5~30 times/min adjustable.
The machine can measure tensile, tearing, peeling, splicing resistance, etc. of various materials; resistance property; used for wire elongation
This tester is used to test the insertion force and pull-out force of various connectors. It has continuous plugging and unplugging function; the number of plugging and unplugging can be arbitrarily set, that is, it will automatically stop after reaching the set number of The fixture is a fool-proof function, which can avoid artificial damage to the sensor and the connector. The transmission mechanism adopts noiseless gears, operates at a constant speed, and has no noise. The fixture is a universal fixture and is Suitable for different connectors. Can also be used for connector plug life test, the entire set of functions can be completed within the program.
Touch screen real-time display operation interface, with a variety of operating modes such as jog, manual, and automatic, the speed can be automatically adjusted; test conditions are input by the touch screen and automatically stored.
Contact Person: Sophia Su