Send Message
Home News

company news about Interpretation of the ventilation aging test chamber

Certification
China DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD certification
China DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD certification
Customer Reviews
Before I buy the machine, I see our partner use your machine, after receive it, all is good. thanks, hope make deal next time too.

—— Max Will

At the beginning I worry about if your company can delivery in time, It turns out your company is good, no delay,A pleasant collaboration.

—— Peter Huang

Nice cooperation! We appreciated for your company's kind support on our projects. Very good service.

—— Mr Hussain

Professional quotation, professional technology, so that we receive timely goods, trustworthy enterprises.Hope we can still cooperate next time!

—— Mr. Paul Garry

I'm Online Chat Now
Company News
Interpretation of the ventilation aging test chamber
Latest company news about Interpretation of the ventilation aging test chamber

Box structure:

1. Inner box size: 500×400×500 (W×H×Dmm)

2. Outer box size: based on the real thing

3. The controller is located on the right side of the machine, and the single door is opened from right to left;

4. The inner material is SUS304 # 1mm stainless steel plate, and the outer material is SECC steel plate; 1.2mm; Baking paint treatment.

5. There is a glass window (280*280mm) on the door, and there is a fluorescent lamp in the box, which can be turned on when the lamp is needed;

6. One set of speed regulating motors, one set of dynamic test turntables,

7. The insulation material is imported rock wool, which has good thermal insulation effect;

8. The pressing material of anti-secret is Silicom;

9. Attached with movable casters and fixed feet, which can be pushed arbitrarily and fixed in position;

10. The appearance of the structure is shown in the pictures and drawings.

Temperature control system

1. Analytical accuracy±0.5°C%

2. Uniformity±2.0°C%

3. Temperature range: RT~200°C

4. Heating time: room temperature ~ 100°C for about 15 minutes.

5. Heater: solenoid heater with heat sink

6. The temperature control is PID microcomputer, which can be automatically calculated, PV/SV is displayed at the same time, and the button is set, and any temperature value between normal temperature and maximum temperature can be set; SSR control, A-meter, V-meter, temperature protection device, time setter.

7. Timer setting, 99.9 seconds - 999 hours (you can choose to set hours, minutes, seconds Yangming, Taiwan)

a Continuous use

b. Temperature to timer, time to cut off heating current (alarm device) (Taisong, Taiwan)

8. Temperature sensing CA(K)TYPE;

9. The output is 12V;

10. The current controller is SSR contactless RELAY;

11. The timing function is up to 999 hours;

12. Air change: 5-100 times/h

13. Gas volume adjustment: manual fine-tuning cone air volume regulator (the power consumption when the temperature is fixed is calculated by watt-hour and digital TIMER to calculate the air change of the furnace)

Gas volume calculation

Measurement of air exchange rate: calculate the air exchange rate with watt hours,

Air exchange formula conversion: N= 3590×(X-Y)÷

latest company news about Interpretation of the ventilation aging test chamber  0 V×D×△t

 

N: air change; V: the volume of the box;

X: the amount of power consumed when the ventilation felling is turned on;

Y: power consumed without ventilation;

△t: the difference between the operating temperature and the ambient temperature;

Constant: 3590

Power supply device

Power supply: 220V single phase 50/60Hz, current: 23A, total power: 4KW;

Air supply system

1. Forced horizontal air supply circulation;

2. The motor is a special type for long axis temperature resistance, and the horse rate is 1/2HP/50Hz;

3. The fan is a multi-blade turbine type;

4. It is equipped with an adjustable deflector fan.

5. Wind speed in the trough: about 1m per second

Security protection system

1. High temperature protection system: when the temperature is out of control due to external forces, the system will automatically stop the power supply of the whole machine when the set temperature exceeds 10 degrees, so as to protect the safety of your products and machines;

Overcurrent protection system: When the power of the whole machine exceeds the normal power due to the applied voltage is too high or other reasons, the system will automatically power off to protect the industrial control components of the whole machine from being damaged.

Pub Time : 2024-07-05 16:04:30 >> News list
Contact Details
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD

Contact Person: Miss. Sophia Su

Tel: +86-13266221899

Send your inquiry directly to us (0 / 3000)