|Working Voltage:||AC 220V ± 10V 50Hz||Heating Power:||3500W|
|Standard:||GB/T118352-2016||Dimensions:||1000 * 400 * 1000 Mm|
|Voltage:||220V 50Hz 3.5KW||Test Pressure:||490Pa|
horizontal flammability tester,
fire test chamber
GB/T11835-2016 Rock wool,slag wool and its products for thermal insulation Testing Equipment
Product overview: Suitable for rock wool, slag wool, glass wool and products, not for aluminum silicate wool and its products. Under a fixed load, the sample is heated at a certain heating rate to achieve the specified thickness shrinkage rate. The thermal load shrinkage temperature is calculated by interpolation and calculated.
|Required installation space||1000 × 600 × 1000mm (length × width × height)|
|Power supply||220V / 50 / 50HZ, power above 2200W|
|Exhaust||require exhaust treatment for samples that have heat|
|Ambient environment requirements||Keep away from flammable and explosive materials and corrosive liquids and gases|
|Working environment||20 ℃ -40 ℃|
|Voltage||220V 50Hz 3.5KW|
|Temperature controlled heating||0-800 ℃|
|Heating rate||(50 ℃ -450 ℃) 5 ℃ / min; (450 ℃ -800 ℃) 3 ℃ / min|
It consists of a heating furnace, a heating container and a temperature sensor.
Ambient temperature: room temperature to 40 ° C
Relative humidity: ≤75%
Working voltage: AC 220V ± 10V 50Hz
Heating power: 3500W
Scale measurement range: room temperature to 900 ° C
Heating rate: 5 ℃ / min ± 0.3 ℃ and 3 ℃ / min ± 0.2 ℃ can be set
The instrument uses a single-chip computer and a multi-point program to heat up.
Heat source adopts hot plate type, safe and reliable, long service life
The instrument is equipped with a panel printer, which can print the test results in time.
Implementation method: using a microcontroller or PLC temperature control module to achieve
Working voltage: AC 220V
Heating rate: the rising rate is divided into two sections, normal temperature ~ 700 ℃ and 700 ~ 900 ℃; and the heating rate and the maximum temperature can be set, the error min ± 0.2 ℃.
Thermocouple: K type
Heating furnace: ceramic fiber, chemical resistance, high temperature resistance, long-term use at 1600 ℃, short-term temperature of 1800 ℃, resistance to rapid cooling and rapid heating, not easy to crack, using injection molding, high density
Outer insulation: fire resistant
Heating furnace wire: nickel 80 chromium 20 alloy wire, temperature resistance 1350 degrees
Dimensions: 1000 * 400 * 1000 length, width and height
Contact Person: Sophia Su