Carpet Resistance Fire Testing Equipment PLC Control Single Station

PLC Control Single Station Carpet Flame Resistance Testing Equipment

Scope of application:

Suitable for carpet flame retardancy, to detect the flame retardant carpet and heat shrinkage.

Comply with the standards:

Meet the requirements of ISO6925, BS6307, BS4790, GB/T 14768 related standards.

The surrounding and bottom of the test chamber are made of thermal insulation materials such as insulating tiles and steel structures. A mirror with an angle of 45° is installed at the top to observe the test conditions.

The equipment includes the following parts: M16 (hexagonal) nut, weight 30+3/-2g, A2 steel, total 5 steel rings, square metal plate, light grid, configuration potholder: one, dual timing configuration : One

No sealed crucible (heating oven) and drying oven (required)

Main parameters:

Test station: 1 station.

Sample size: L400*W200.

Air source: LPG or natural gas; test gas must be used for arbitration tests. (prepared by customer)

Gas pressure: 3.92KPa adjustable.

Flame time: 0～99s/min can be set freely.

Combustion angle: 0 ~ 45 ° adjustable.

Burner: brass, made by our company.

Flame height: 24mm adjustable.

Ignition system: high voltage electronic ignition.

Power Requirements: AC220(±10%)V/50HZ

Components, materials:

Appearance size of the instrument: 353mm × 260mm × 920mm

The size of the box is: 380×380×380mm

The chassis material is made of 304 stainless steel. The CNC machine tool is formed by bending and arcing, which makes it more clean and beautiful.

Control system: The control box adopts the relay control system. All electronic originals adopt the well-known domestic brands and can better ensure the working performance and detection accuracy of the machine.

Environmental conditions of use:

There is no strong electromagnetic radiation source nearby.

There is a proper maintenance space around the equipment.

Temperature: 10 to 30°C.

AC220V/50HZ.

Voltage allowable fluctuation range: 220V±10%.

Allowable frequency fluctuation range: 50Hz±1%.

When the equipment is not working, the temperature of the environment should be kept within +0-45°C.